V311B 12V Car Battery Tester 100‑2000CCA Charging Circuit Load Tester Load Detector Diagnostic Tool for a Variety of 12V Batteries.

Item Type: Car Battery TesterModel: V311BMain Control Chip: APM32F103VCT6Appearance Color: blueInterface Type: a pair of reverse black and red clipsShell Material: ABSDisplay: 2.8 inch TFT color screen, resolution: 240 x 320External Power: 12VWorking Voltage: 9-18VMeasurement Standards: CCA, JIS, GB, SAE, MCA, CA, DIN, IEC, EN, BCIMeasurement Type: Ordinary battery, AGM flat plate, AGM winding, GEL, EFBMeasuring Range:CCA: 100-2000ABCI: 100-2000ACA: 100-2000AMCA: 100-2000AJIS: 26A17-24SH52DIN: 100-1400AIEC: 100-1400AEN:100-2000ASAE: 100-2000AGB: 10-250AhProduct Parameter Information Description:1. Voltage:The current voltage value of the battery measured2. Rated value:The nominal value on the battery, such as SAE CCA (cold start current value), GB Ah (capacity value)You need to input the value on the battery label to the tester and select the corresponding test standard;3. Measured value:The current value measured and evaluated by the detector, such as CCA,AhIt is the difference between the nominal value and the measured valueGenerally, the measured value of a new battery will be close to the nominal value. The longer the battery is used, the worse the aging, and the lower the measured value will be4. Internal resistance:The internal discharge resistance value of the battery varies with the brand, process, type, current temperature, and duration of use of the batteryThe better the performance of the general battery, the lower the internal resistance value5. Life:The value calculated based on the evaluation of the rated value and the current state of the battery reflects the degree of aging of the battery and the percentage of life remaining6. Remaining power:The value calculated according to the current state of the battery indicates how much power is left in the

• Main Function: Support battery test under starting and charging status, test and display battery voltage, rated value, measured value, internal resistance value, service life, remaining battery parameter information.
• Other Function: Support fast and standard test mode selection, viewing battery waveform analysis, picture saving and printing function, and USB printing.
• Multi Modes Choice: Support multiple modes and standard tests, can quickly evaluate the performance of the vehicle battery, and display the results.
• Practical: It can covers 8 battery standards CCA, JIS, GB, SAE, MCA, CA, DIN, IEC, EN, and BCI. Supports 9 languages including English, Spanish, French, Portuguese, Italian, German, Polish, Russian, Chinese.
• Wide Application: This battery detector is suitable for a variety of 12V batteries. It is widely used for ordinary lead battery, AGM flat battery, AGM spiral battery, GEL, EFB.