8HP 4 Stroke Outboard Motor Boat Engine Single Cylinder, 196cc Heavy Duty Outboard Motor Boat Engine Air Cooling System for Small Fishing Boat Version for Fishing Boat, Rubberboat Inflatable Boat

DetailsLarge Capacity Fuel Tank: This product is equipped with a 0.4gal fuel tank, which can reduce the number of times you have to add fuel and thus improve your efficiency.Baffle: The product is equipped with a baffle above the propeller, which can effectively reduce wave tossing and avoid water from wetting your clothes.Adjustable Machine Hanger: The vertical height of the stern plate is 15.75-21.65 inches adjustable, making it suitable for a wider range of boats.How to Use Air DampersClose the dampers when the machine is cold. Open the damper after starting the machine. When the machine is running, you need to keep the damper open, otherwise, the machine will automatically turn off. Close the dampers for a long time and using the machine will lead to flooding. If you encounter a flooding situation, you need to remove the spark plug, and then turn the machine upside down to dry for 1-2 days, and finally, you can use it again.ApplicationThis product is suitable for small boats of different materials (such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats), and is applicable to water operations in rivers, lakes, reservoirs, fish ponds, etc. It is suitable for boats with a load of about 1 ton/2205lbs. SpecificationMaterial: Aluminium Alloy, Stainless Steel Screws, Industrial PlasticColor: BlackType: 4-stroke 8 HPCapacity: 196CC/11.96cu.inCooling System: Air CoolingCylinder Bore Stroke: 70x51mm/2.76x 2.01in Power Transmission Method: Gear Transmission MethodCompression Ratio: 8.4:1Fuel Tank Volume: 1.5L/0.4galRecommended Fuel: Normal Unleaded GasolineOil Tank Volume: 0.6L/0.16galGear Oil Volume: 0.1L/0.02galFuel Consumption: 1.55L/H / 0.41gal/HIdle Speed: 1800 + 500 rpmNet Torque Speed: 10.5N.m(7.7ibf.ft)2500rpmRev: 4500r/minIgnition System: TCIStarting Method: Hand-pull Recoil Suitable Vertical Height of Stern Plate: 40-55cm/15.75-21.65inOverall Height: 1.06m/3.47ftHost Length: 33cm/12.99inLength from Handle to Baffle: 50cm/19.68inPropeller Part Length: 23cm/9.05inGross Weight: 31kg/ 68.34 lbs Net Weight: 28kg/ 61.73 lbsPackage Size: 116x37x 46cm/45.67x14.57x18.11 inPackage Included1 x 4 Stroke 8HP Outboard Motor Boat Engine1 x Chinese ManualAll Accessories for InstallationNotes1. Gasoline is prone to oxidation and degradation when stored, and using degraded gasoline will block the oil circuit and cause difficulty in starting. If the engine is not used for more than half a month, please empty the fuel in advance.2. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period（10 hours).3. Please check the oil condition of the four-stroke machine for the first 5 hours of use, and then check the oil and air filter before each use.4. After using it in salt water, it must be washed immediately with clean water.5. Please store the engine upright with the engine facing upwards, not upside down. Otherwise, the oil may flow into the engine combustion chamber and cause engine damage.6. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• High-quality Material: This product is made of high-quality aluminum alloy body, stainless steel screws, and engineering plastics, which has high hardness, anti-corrosion, and anti-rust performance, and is uneasy to bend to effectively extend the service life of the product.
• Powerful Power: The engine is a 4-stroke 8hp engine, and the speed can reach 4500rpm. Powerful power can let you drive quickly and save a lot of time and energy. Adjustable Machine Hanger-The vertical height of the stern plate is 15.75-21.65 inches adjustable, making it suitable for a wider range of boats.
• Easy to Operate: This product has a strong manual start function, you only need to pull 1/2 pull rope to start. It is easy to pull off the engine cover with a push button latch for quick access to the motor.4 stroke outboard motor is suitable for small boats of different materials (such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats), and is applicable to water operations in rivers, lakes, reservoirs, fish ponds, etc. It is suitable for boats with a load of about 1 ton/2205lbs.
• Easy to Carry: The total length of the product is only 3.47ft and the weight is only 61.73 lbs. It is very easy to carry and store.has a low energy consumption of 0.41gal/H. This can help you save a lot of energy and money
• Flexible Steering: This product has 360-degree steering function, which can easily control the steering of the boat.The product doesn‘t have reverse gear setting.